Wuxi Special Ceramic Electrical Co.,Ltd
High quality,small trial produce and quick delivery.
Add to Cart
cordierite ceramic,cordierite honeycomb,ceramic honeycomb catalytic converter
Cordierite Ceramic
Wuxi Special ceramics offer cordierite materials with dense and porous strutures,all of which are distinguished by an outstanding thermal shock resistance,while at the same time having high heat resistance and electrical insulation strength.
Cordierite ceramics are grouped in to C410,C511,C520 and C530
In accordance with C410,C511,C520 and C530 in compliance with IEC672 are ceramic materials on the basis of cordierite,a magnesium aluminium silicate mineral with extremely low thermal expansion.In addition,they contain additives of mullite,corundum and silicon carbide.
Why choose Cordierite materials
A. outstanding thermal shock resistance
B. high degree of electrical insulation strength
C. corrrosion resistance
D. high heat resistance(C530 up to 1300℃,specialities up to 1600℃)
E. comparatively lower production costs
Ceramic bobbin for water heater
Ceramic bobbin heater is made of porous cordierite(C520)ceramic heating element with wire.
It heat liquids or semi-solid materials such as water,oil,wax,fats,and bitumen.These heaters are mainly used for direct heating of air and indirect heating of liquids and gases where the element is fitted into a pocket in the process tank or system so that the element may be replaced without draining down the system or vessel.
Why choose Wuxi Special ceramic?
A. Dry pressed molding with high mechanical strength
B. Lower production cost
C. Fast delivery with large quantity
Specification
| Cordierite Main Parameter:(Chemical/physical) | |||
| Property | Item | Unit | Cordierite |
| General properties | Main chemical ingredient | 2MgO,2Al2O3,5SiO2 | |
| Bulk Density | g/cm³ | 2.5 | |
| Color | - | gray | |
| Water absorption | % | 0 | |
| Main Characteristics | Very low thermal expansion Low Weight | ||
| Main Applicationa | Lithography Stage Component Wafer Inspection SEM/TEM | ||
| Mechanical Properties | Flexural Strength | Mpa | 190 |
| Elastic Modulus | Gpa | 140 | |
| Vickers Hardness | Gpa | 8 | |
| Bending Strength(20℃) | kgf/c㎡ | 900 | |
| Compressive Strength 20℃ | kgf/c㎡ | 3500 | |
| Fracture Toughness(k l c) | Mpa*M*1/2 | 1~1.5 | |
| Thermal Properties | Thermal conductivity(20℃) | w/mk | 4 |
| Coefficient of Thermal expansion (40-400℃) | 1x10-6/℃ | 1.5
| |
| Thermal shock resistance | ℃ | 400 | |
| Maximum use temperature | ℃ | 1000 | |
| Electrical Properties | Dielectric Strength(1mhz) | ac-kv/mm(ac v/mil) | 19.1 |
| Dielectric Constant(1MHZ) | 25℃ | 4.9 | |
| Volume Resistivity | ohm-cm(20℃) | ＞10*14 | |
| ohm-cm(300℃) | 10*12 | ||
| ohm-cm(500℃) | 10*10 |
Our Company
Wuxi Special Ceramic Electrical mainly produces alumina, Silicon nitride, Zirconia, Steatite, Boron nitride, Cordierite,mullite products, widely used in metal welding, electronic conductor, mechanics, assembling, insulation, chemicals, instrument, textile, nuclear industry, aerial field.We accept trial produce according to the drawing or sample.It usually takes 15 days to finish trial product.Mass produce usually takes 30 days.Goods' package is carton or PLT.It can be negotiable with each other.
We mainly sell goods to toshiba lighting group in Japan and Europe.Our aim is to deliver goods with high quality at quick delivery date.
quality guarantee: mass produce by 100% inspection
